DESCRIPTION:
This is an aftermarket compatible chip for Kodak 10 cartridges, which can be installed on any Kodak 10 cartridge and will allow your printer to recognize the cartridge as FULL.
Why do I need a chip for the Kodak 10? Kodak has made the 10 cartridges dependent on the chips, basically when you run out of ink on your Kodak 10 cartridge, the printer reads a message from the chip that says the cartridge is EMPTY. This causes the printer to send you error signals until you replace the cartridge.
Now you can refill your Kodak 10 cartridges and simply add our new compatible chips, which will be recognized by your printer as NEW, thereby allowing you to print with your refilled cartridge just as though it were new!
Save Money:
Consumers can beat the smart chip technology and keep on buying cheaper compatible cartridges or refill kits instead of the expensive OEM cartridges. One method is to use chip resetter to reset the cartridge once it is refilled or when the cartridge is close to the expiration date. The other method is to buy 100% compatible cartridges which have a new replacement chip installed**. Without this chip, your printer software thinks that the cartridge is always low which may cause problem when printing.
or
Kodak 10 Compatible Chip 
-
Printer Products -
Site Map
