DESCRIPTION:
Reset gear for use in Brother TN350 toner cartridges.
This gear is only needed if you are refilling STARTER* cartridges for the Brother TN350, since the starter cartridges Do not always have this reset gear installed. The printer displays a "toner life end" message if no reset gear is detected. A reset gear must be installed on any used TN350 starter cartridge in order for the printer to function properly once the cartridge has been refilled and re-installed in the printer.
* A starter cartridge is the cartridge that ships free with your printer. If you purchase the cartridge separatley, you will not require this gear.
Each kit contains: 1 reset gear + instructions for assembly (easy to do!)
Save Money:
Most of the printers come with pre-installed chips. These chips keep a check on the cartridge's toner level. When the toner depletes, the chip sends a message notifying you that the cartridge is running low on toner. Even after you refill the cartridge, the chip doesn't reset itself and maintains the same toner level as before. In order to get the printer to recognize the refilled toner, you have to reset the chip's ink level.
At inkjetrefillkit.net, we carry for these toner printers:
Brother,
Canon,
Dell,
Epson,
HP,
Konica Minolta,
Kyocera Mita,
Okidata,
Ricoh,
samsung,
Sharp and
Xerox
or
Brother TN-350 reset gear for starter cartridges 
-
Printer Products -
Site Map
